Publications

This test method describes the procedure for determining the resistance of hot poured joint sealants to flow at a temperature of 70 °

This test method sets out the procedure to be used to prepare joint sealant samples for testing.

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

This webinar introduces Austroads new projects lined up for the 2022-23 financial year. The session is most beneficial to consultants who may be interested in tendering for Austroads projects. Upcoming projects focus on road network resilience,…

Austroads Technical Specification ATS 3460 sets out the requirements for the design and application of sprayed bituminous surfacing or resurfacing. The technical specification can also be downloaded as a Word document.

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

Austroads Technical Specification ATS 3120 sets out the requirements for the supply of aggregates used for sprayed bituminous surfacing work. The technical specification can also be downloaded as a Word document.

Australia and New Zealand produce about 510,000 tonnes of end‑of‑life tyres annually. Crumb rubber derived from end‑of‑life tyres has been used in Australia for several decades to enhance the performance of binders used in sprayed seals but prior to…

Crumb rubber binders have been used to construct sprayed seals in Australia for many decades but have not been utilised in asphalt in the past. Due to the lack of crumb rubber binder grades in the Australian national polymer modified binder (PMB)…

This Pavement Work Tip provides guidelines for the planning of works in preparation for resealing.