Publications

General Conditions of Contract for Construction - National Capital Works 4 (NCW4) has been developed for use in “construct only” contracts where the principal is a government or semi-government agency.

This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).

This webinar, presented on 25 July 2019, provides an overview of the new General Conditions of Contract for Construction - National Capital Works 4 (NCW4), released by Austroads and the Australian Procurement and Construction Council (APCC).

This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.

This webinar, presented on 14 June 2018, provides an overview of the updated Austroads microsurfacing guidelines and model specification. It covers: major changes to the microsurfacing guidelines and specifications related test methods materials and…

Guidelines and Specification for Microsurfacing provides guidelines for the use of microsurfacing treatments in Australia. Microsurfacing is presently the only type of bituminous slurry surfacing applied in Australia. The document was produced by…

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…