Publications

This webinar provides an overview of Austroads&rsquo

The Engineering Guideline to Bridge Asset Management was developed to provide specific asset management guidance for road bridges. The guideline promotes an engineering approach (engineering principles, knowledge, experience and modelling tools) as…

Asset management is defined by ISO 55000 (2014) as &lsquo

Detailed investigation and live-load evaluation was undertaken for several 1930s reinforced concrete bridges followed by strengthening where required.

NSW Roads and Maritime Services manage 26 movable span bridges of which 11 are still operational. These bridges were the subject of a recently completed study undertaken jointly by RMS and GHD Newcastle which focused on the components of each bridge…

The Ngauranga Interchange is located at the intersection of two State Highways that provide the only highway access from the surrounding regions to the city of Wellington, New Zealand. Reinforced Earth® walls retain the seaward side of the off-ramp…

The Bailey bridge system was originally invented for military usage during World War II. Since then, it has been used to meet emergency or temporary bridge needs. It has also been widely used as a permanent solution for pedestrian and road bridge…

Sydney’s ANZAC Bridge was recently the subject of a maintenance project which addressed four main areas to improve the future performance of the structure. These areas were: stay cable improvements

The State Highway 16 Causeway Upgrade Project forms one section of the NZ Transport Agency’s Western Ring Route around Auckland, which is due to be completed by early 2017. The project improves, widens and raises approximately 4.8 km of motorway,…

The current 2004 revision of AS 5100.7 provides guidance on bridge rating which is the comparison of one assessment loading or vehicle to a code design load. The assessment loading or vehicle can be either a former code design load or a specific…