Publications

Showing 1 - 10 of 36 Publications
Truck Side / Longitudinal Friction Literature Review and Data Analysis
Practitioners have raised concerns when designing for heavy vehicles with respect to the combination of design values for side and longitudinal friction demand as well as design criteria for horizontal curves with adverse superelevation. This report…
National Specification for Crumb Rubber Binders in Asphalt and Seals
Crumb rubber binders have been used to construct sprayed seals in Australia for many decades but have not been utilised in asphalt in the past. Due to the lack of crumb rubber binder grades in the Australian national polymer modified binder (PMB)…
Development of the Dynamic Shear Rheometer Consistency 6% Test Method for Polymer Modified Binders
This report describes research work into the development of a new test method utilising the dynamic shear rheometer (DSR) to conduct consistency 6% at 60 
Technical Basis of Austroads Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design
This report documents the technical basis of the 2011 and 2019 editions of Austroads&rsquo
Technical Basis of Austroads Guide to Pavement Technology Part 2: Pavement Structural Design
This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo
Austroads Review Report: Traffic Noise/Long-life Surfacings

This report provides a review on surface characteristics in relation to traffic noise and long-life surfacings. For the conventional asphalt surfacings in general road construction practice, the selection of mix type and size would define two most…

Austroads LTPP and LTPPM Study - Summary Report 2009-10

Austroads Project AT1064 Long Term Performance Monitoring and Model Development was initiated in 1994/95. The project was reviewed in 2003 and later in 2007 by GP Youdale Consulting Engineers to assess the project’s program and progress and, if…

Elastometer Upgrade and Commissioning

The Elastometer is the key testing instrument for PMB specifications in Australia. The Elastometer operating software and data acquisition system were developed in the 1980s, originally to run under DOS and later upgraded to Windows 3.1. This…

Weigh-in-motion Management and Operational Manual

A weigh-in-motion (WIM) workshop held in Hobart in March 2008 identified a knowledge gap in regard to the management and operation of WIM equipment and associated data. Austroads Project AT1482 aims to fill this gap through establishing national…

Predicting Structural Deterioration of Pavements at a Network Level: Interim Models

Pavement performance data, in terms of Falling Weight Deflectometer (FWD) deflection, was collected from 71 test sections available from the LTPP/LTPPM sites and used to develop structural deterioration models for flexible asphalt and sealed unbound…