Skip navigation
Open main navigation
Open/Close Search bar
Search
View Cart
Drivers & Vehicles
Toggle
Drivers & Vehicles
This section includes managing drivers with health risks, requirements for visiting drivers, NEVDIS, and the introduction of connected and automated vehicles to Australasia.
Assessing Fitness to Drive
Vehicles and Technology
NEVDIS
Overseas Drivers
Registration and Licensing
Road Safety & Design
Toggle
Road Safety & Design
This section covers safety barrier assessments, and the work of the Road Safety Task Force and Road Design Task Force.
Barrier Assessment
Road Safety
Road Design
Safety Hardware Training and Accreditation Scheme (ASHTAS)
Transport Operations
Toggle
Transport Operations
In this section you'll find information about our work to improve the efficient, reliable and safe operation of the road network for all road users.
Network Operations
Traffic Management
Temporary Traffic Management
Freight
Active Travel
Transport Infrastructure
Toggle
Transport Infrastructure
This section includes information about strategic asset management, the management of bridges, pavements and tunnels, project delivery and the national prequalification system.
Asset Management
Bridges
National Prequalification
Pavements
Project Delivery
Road Tunnels
Technical Specifications
About
Contact
News
Events
Projects
Publications
Tenders
Login
Home
Publications
Publications
Share
Subject area
All
Materials
Pavement
Test Methods and Specifications
Search publications library
Filter
Open/Close All Filters
Type
Type
Corporate Reports
1
Research Reports
4
Technical Reports
5
Test Methods
Topic
Topic
Aggregate test methods
2
Bituminous mixes test methods
5
Equipment test methods
1
Year
Year
2023
22
2022
24
2021
11
2020
13
2019
10
2018
21
2017
13
2016
23
2015
10
2014
9
2011
11
2010
10
2007
11
2006
16
2005
Publication State
Publication State
Live
Sort by:
Relevance
Date (Newest first)
Date (Oldest first)
Title (A-Z)
Title (Z-A)
Publication Code (A-Z)
Publication Code (Z-A)
Showing 1 - 8 of 8 Publications
Test Methods
Remove Test Methods filter
2005
Remove 2005 filter
Live
Remove Live filter
Clear all filters
Clear all filters
Fully-matching results
Sample Preparation - Compaction of Asphalt Slabs
AGPT-T220-05
1 Sep 2005
Pavement
More
This method sets out recommended procedures for mixing, compacting, conditioning and trimming asphalt to provide homogeneous specimens suitable for wheel track testing, beam flexure testing, resilient modulus testing and other asphalt…
Asphalt Particle Loss
AGPT-T236-05
1 Jun 2005
Pavement
More
This test method sets out the procedures for determining particle loss (abrasion) from laboratory prepared specimens of open graded asphalt. The test may be performed on dry samples or after period of moisture conditioning.
Asphalt Binder Content (Ignition Oven Method)
AGPT-T234-05
1 Jun 2005
Pavement
More
This method details the determination of the binder content of asphalt mixes by ignition at a temperature of not less than 540°C and the subsequent determination of the particle size distribution by sieve analysis.
Binder Film Index
AGPT-T237-05
1 Jun 2005
Pavement
More
This test method sets out the calculation procedures for the determination of a Binder Film Index. The test is applicable to all types of asphalt.
Field Calibration of Aggregate Spreaders
AGPT-T537-05
1 Jun 2005
Pavement
More
This method sets out the procedure for determining the spread rate of cover aggregate delivered from a mechanical aggregate spreader.
Absorption of Bituminous Binder into Aggregate
AGPT-T052-05
1 Jun 2005
Pavement
More
This method describes the procedure for the determination of the quantity of binder absorbed by an aggregate. The volume of aggregate is determined from its bulk particle density in a saturated surface dry condition. The volume of binder free…
Average Least Dimension of Aggregate by Direct Measurement (Nominal Size 10mm and Greater)
AGPT-T051-05
1 Jun 2005
Pavement
More
This standard sets out the method for determining the Average Least Dimension (ALD) of aggregate particles by the use of vernier callipers or dial gauge or a slotted gauge. The method is applicable to aggregate of nominal size 10 mm and greater for…
Verification Procedure for a Gyratory Compactor
AGPT-T211-05
1 May 2005
Pavement
More
Asphalt characterisation tests require equipment that is well maintained and correctly adjusted. The procedures described in this document will provide a means of verifying that a Gyropac gyratory compactor is in a suitable working condition to…
1
Latest news
21 May 2024
New report details findings of survey of medical practices and practitioners
13 May 2024
Austroads and AfPA update bituminous binder sampling practice guidelines
9 May 2024
Neil Scales honoured with Austroads Medal for transformational leadership
Sign up for our monthly newsletter RoadWatch Roundup
Name
Email
Hide Feedback button
Feedback
Close
Feedback form
Name
Email
Repeat email address
Telephone
What type of feedback would you like to leave?
Select…
Compliment
Complaint
Suggestion
Feedback text area...
Would you like a response?
Yes
No