Publications

This specification framework outlines the requirements for PMBs and crumb rubber modified binders for use in both sprayed sealing and asphalt applications.

This method has been developed for extracting bituminous binders from bituminous mixtures i.e. asphalt field samples, loose plant mix or reclaimed asphalt pavement.

This test method sets out the procedure for the determination of viscosity of binders recovered from RAP source materials, as well as of virgin binders and rejuvenators. The viscosity is determined under specific conditions of oscillation loading,…

Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Designprovides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. The advice has been generally…

Guide to Pavement Technology Part 1: Introduction to Pavement Technology provides general information regarding the purpose and function of pavements, pavement types and their components, pavement materials, the types of pavements commonly in use…

Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…

This method describes a procedure for determining whether a PMB can be easily returned to a homogeneous state after subjecting a sample of the PMB to an elevated temperature for a prolonged period. This ease of remixing is assessed by determining…

This technical note provides guidance on precoating aggregate to improve the bond of the binder to the aggregate in a spayed seal.