Publications

This technical note provides an overview of the use of stone mastic asphalt in Australia.

This technical note provides an overview of the use of foamed bitumen sealing in Australia.

This note provides guidance for evaluation the suitability of dry powdered polymer as a stabilisaing binder and outlines application and construction methods.

This technical note covers factors that can be considered in the design process and how they affect the performance of the stabilised materials.

This technical note outlines those performance criteria used for stabilised pavements in Australia and highlights test variations possible for projects according to their size and traffic volume.

This technical note provides guidance on the use of ultra thin asphalt surfacings which are typically placed with a minimum thickness of around 12-15 mm, or about half the thickness of similar sized conventional asphalt wearing course mixes.

This technical note reports on the construction and testing of a test pavement using marginal materials.

This technical note provides guidance on the the use of non-structural asphalt surfacing and overlays. It includes treatments of existing surfaces, non-structural design mix and the compaction of overlays.

This technical note provides guidance on precoating aggregate to improve the bond of the binder to the aggregate in a spayed seal.

This technical note provides guidance on the insitu deep lift recycling of pavements using cementitious binders. It includes testing, stablising agents, pavement design and construction.