Publications

Filter
Topic
Publication State
Showing 1 - 10 of 10 Publications
Webinar: NSW Movement and Place Framework
Movement and Place is a multi-disciplinary, place-based approach to the planning, design, delivery and operation of transport networks. It broadens our thinking about our roads and streets beyond their functional role in supporting movement - they…
Handling Viscosity of Polymer Modified Binders (Brookfield Thermosel)
This test method sets out the procedure for determining the apparent viscosity of PMBs at temperatures above 100°C, using the Brookfield Thermosel rotational viscometer.
Method of Sampling Polymer Modified Binders, Polymers and Crumb Rubber
This test method applies to polymer modified binders, polymers and crumb rubber.Materials are sampled according to this protocol to ensure that correct sampling procedures are followed and that test results provide the required information on…
Flash Point of Polymer Modified Binders
This test method sets out the procedure for the determination of the flash point of polymer modified binders (PMBs). This test method is applicable to PMBs used in the construction and maintenance of pavements (as specified in ATS 3110).
Compressive Limit of Polymer Modified Binders
This test method is applicable to all binders that do not have a viscous response at 70°C and at long loading times when confined to film thicknesses in the range 0.1 to 1mm. It is applicable to all modified binders.
Mass Change or Loss on Heating of Polymer Modified Binders after Rolling Thin Film Oven (RTFO) Treatment
This test method sets out the procedure for the determination of mass change or loss on heating of a polymer modified binder (PMB) due to the effect of heat and air during rolling thin film oven (RTFO) treatment.
Protocol for Handling Modified Binders in Preparation for Laboratory Testing
This method complements AS/NZS 2341.21 by setting out the handling procedures for the testing of modified binders.
Torsional Recovery of Polymer Modified Binders
This test method sets out the procedure for the determination of torsional recovery of polymer modified binders (PMBs) under specific conditions using a simple torsional recovery test apparatus. PMBs are thought to provide benefits due to their…
Webinar: Austroads Project Pipeline 2022-23
This webinar introduces Austroads new projects lined up for the 2022-23 financial year. The session is most beneficial to consultants who may be interested in tendering for Austroads projects. Upcoming projects focus on road network resilience,…
Webinar: National Walking and Cycling Participation Survey 2021
Launched in 2011, the National Cycling Participation Survey (NCPS) has been run every two years. Its original aim was to establish a baseline and measure performance against the National Cycling Strategy 2011-2016. Until 2019 the NCPS was managed by…