Publications

This webinar explores the origins of the program, how and why it started, it will share high-level insights from the evaluation, including what worked, what didn’t and what was learnt along the way. It also shares ‘where to next’ for the program and…

How do drivers respond to the iconic tunnel design features included in the NorthConnex road tunnel project? What were the objectives of the designs and have the designs achieved these objectives? How do the designs affect driver behaviour? The…

This report documents the findings from a research study, which aimed to investigate driver behaviour and perceptions while driving through a simulated version of the Sydney NorthConnex (NCX) road tunnel and evaluate the effectiveness of aesthetic…

This report documents the findings from a research study which aimed to validate the use of a virtual reality (VR) driving simulator to study driving behaviour in a real road tunnel.

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…

The National Walking and Cycling Participation Survey is a survey of the Australian community to understand their participation in walking 

This document describes the procedures to be followed to test an asphalt specimen using a wheel tracking test device. The procedures can be carried out on prismatic specimens that have been manufactured in the laboratory, cut from an existing…

This document describes the procedures to verify that a wheel tracking test device complies with the requirements of those devices permitted for use in Austroads test method ATM 231. The procedures are advisory rather than mandatory and reference…

The test method specifies procedures for the characterisation of the stiffness and fatigue behaviour of bituminous mixtures using a four point bending test configuration. The test procedure to characterise the complex modulus is contained in Section…