Publications

Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…

This method sets out the procedure for assessing aggregate shape as a ratio of Average Greatest Dimension to Average Least Dimension. This test method can also be downloaded as a 

Austroads Technical Specification ATS 3125 sets out the requirements for added fillers for use in asphalt. The technical specification can also be downloaded as a 

Austroads Technical Specification ATS 3135 sets out the requirements for the supply of reclaimed asphalt pavement (RAP) material used in the manufacture of asphalt. The technical specification can also be downloaded as a 

Austroads Technical Specification ATS 3130 sets out the requirements for the supply of coarse aggregate and fine aggregate for use in the production of asphalt. The technical specification can also be downloaded as a 

Austroads Technical Specification ATS 3466 sets out the requirements for the supply and application of High Friction Surface Treatment, which is used to provide very high skid resistance on the road pavement surface. The technical specification can…

Austroads Technical Specification ATS 3465 sets out the performance-based requirements for the supply and application of Coloured Surface Treatment (CST) to the road pavement surface in applications such as: cycleways / bike lanes

For over a decade, the National Telematics Framework has been setting a benchmark as an effective regulatory framework for optimised vehicle movements, making Australia a world-leader in intelligent access management. The National Telematics…

This test method describes the procedure for establishing sampling locations, sampling intervals or test locations within a lot, which has been defined in terms of mass, volume, perimeter or batches. The method contains procedures which allow…

The asphalt industry is rapidly evolving, and it is widely accepted that prescriptive specifications are not necessarily well suited to take full advantage of the benefits that new and innovative technologies can provide. There is therefore a desire…