Publications

In October 2016 Austroads delivered a two-part webinar providing an overview of the updated Guide to Road Design Part 3: Geometric Design. This second session covers horizontal and vertical alignment, and superelevation.

In October 2016 Austroads delivered a two-part webinar providing an overview of the updated Guide to Road Design Part 3: Geometric Design. This first session covers design objectives, speeds and cross sections.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level automatic crack detection.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a traffic speed deflectometer (TSD).

This report presents a compendium of local and overseas practice and experience in minimising the risk and severity of head-on crashes. It is intended to assist road safety practitioners identify effective actions that can be taken to reduce the…

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement roughness measurement using an inertial profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement surface texture determined using a laser profilometer.

This test method defines the procedure for measuring the surface macro-texture of road pavements, determined by the direct measurement of the road surface profile using a laser profilometer.

This test method defines the procedure for conducting repeatability and bias of measurement checks for rut measurements made by a laser profilometer.