Publications

Austroads project &ldquo

Austroads project &ldquo

This report provides a comprehensive overview of the initial development of various testing frameworks for the characterisation of road-grade recycled plastic, the incorporation of recycled plastics in bitumen and asphalt via various methods (wet,…

This Pavement Work Tip details the production and paving of EME2, a high modulus asphalt produced with a very hard paving grade bitumen and a high binder content.

Australia and New Zealand produce about 510,000 tonnes of end‑of‑life tyres annually. Crumb rubber derived from end‑of‑life tyres has been used in Australia for several decades to enhance the performance of binders used in sprayed seals but prior to…

Asphalt pavements are a major component of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have been putting great efforts to produce pavements which perform and are long-lasting. This has led to the…

Crumb rubber binders have been used to construct sprayed seals in Australia for many decades but have not been utilised in asphalt in the past. Due to the lack of crumb rubber binder grades in the Australian national polymer modified binder (PMB)…

The ban on the export of recycled waste plastic by the Australian government has led to interest in the use of recycled waste plastic in road surfacing applications. Austroads has published a report, Interim guidelines for the use of recycled waste…

This report describes research work into the development of a new test method utilising the dynamic shear rheometer (DSR) to conduct consistency 6% at 60 

This Pavement Work Tip provides a guide to the light application of bituminous binder to an existing asphalt or spray seal surface to increase the binder level on the surface and prevent aggregate loss.