Publications

Filter
Topic
Publication State
Showing 1 - 10 of 12 Publications
Bituminous Surfacing Characteristics
This Pavement Work Tip provides guidance on the characteristics of bituminous surfacing treatments, including user performance requirements.
Production and Paving of EME2
This Pavement Work Tip details the production and paving of EME2, a high modulus asphalt produced with a very hard paving grade bitumen and a high binder content.
Webinar: Technical Basis of Changes to Guide to Pavement Technology
Austroads has published two technical reports drawing together the research underpinning changes made to key components of the Guide to Pavement Technology. The reports detail the technical basis for changes made to 
Sprayed Sealing – Surface Enrichment
This Pavement Work Tip provides a guide to the light application of bituminous binder to an existing asphalt or spray seal surface to increase the binder level on the surface and prevent aggregate loss.
Technical Basis of Austroads Guide to Pavement Technology Part 2: Pavement Structural Design
This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo
Update of RUC Unit of Values to June 2005
This document contains estimates of road user unit costs for use in Australia, calculated as at 30 June 2005. The unit costs are presented in a format suitable for use with most road project evaluation models, techniques, and software used by…
Asphalt Permeability
This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…
Review of AS2008 from an Emulsion and PMB Manufacturing Perspective
Australia s specification for paving grade bitumen AS 2008 evolved in the early 1970s from a penetration grading system to one with viscosity control at 60 Degrees Celsius. In support of this primary performance control property, penetration at 25…
The Asphaltene content of Australian Bitumens Part 1: Testing of Pre-1992 Samples
The report presents data on the asphaltene content of samples manufactured between 1956 and 1991. Asphaltene content is one of the main chemical properties used to characterise bitumen. Bitumens are generally regarded as colloids whereby clusters of…
Development of a Procedure to Chemically Characterise Bitumens using the Iatroscan
This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…