Publications

Filter
Topic
Publication State
Level of Service Requirements for Freight on Rural Roads and Refinement of Heavy Vehicle Roughness Band Index
Following on from previous work, the purpose of this project was to complete an investigation of subjective ratings of ride quality of A, B and C roads in Victoria while driving a passenger car and a range of heavy vehicles.
Webinar: Bituminous Binders and Selection and Design of Sprayed Seals: Guide to Pavement Technology Parts 4F and 4K
This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.
Webinar: Operations of Automated Heavy Vehicles in Remote and Regional Areas
This webinar, presented on 25 September 2018, presents challenges around the introduction of automated heavy vehicles to remote and regional areas and the opportunities for future their use in Australia and New Zealand.
Operations of Automated Heavy Vehicles in Remote and Regional Areas
This report identifies opportunities for future use of automated heavy vehicles in regional and remote areas of Australia and New Zealand, as well as any boundaries to prevent such use. The report provides road managers and industry with direction…
Design and Performance of Foamed Bitumen Stabilised Pavements
There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…
Rural Bridge Cost Benefit Analysis and Inclusion Within an Investment Program
Economic analysis can inform investment decisions around proposed bridge projects. This paper outlines the evaluative techniques and methodologies used in appraising a proposed bridge replacement and approach realignment project located in rural…
Design and Performance of Foamed Bitumen Stabilised Pavements: Progress Report 2

There is a need to improve the Austroads procedures for the mix and structural designs of foamed bitumen stabilised materials.

This progress report summarises the mix design test methods drafted to date and those planned for 2014-15 within the…

Sprayed Sealing: Selection of Spraying Nozzles
This Pavement Work Tip provides a guide to the selection and use of bitumen spraying nozzles.
Polymer Modified Binders and Multigrade Bitumens
This Pavement Work Tip provides a handy summary of the Austroads AP-T235-13 Guide to the Selection and use of Polymer Modified Binders and Multigrade Bitumens.
Methods for Reducing Speeds on Rural Roads: Compendium of Good Practice
This compendium presents information on speed as a contributor to rural road crashes. It provides information on treatments that can be used to address speed, either at key locations (curves, intersections or the approach to towns) or for routes in…