Publications

This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…

Australia s specification for paving grade bitumen AS 2008 evolved in the early 1970s from a penetration grading system to one with viscosity control at 60 Degrees Celsius. In support of this primary performance control property, penetration at 25…

The report presents data on the asphaltene content of samples manufactured between 1956 and 1991. Asphaltene content is one of the main chemical properties used to characterise bitumen. Bitumens are generally regarded as colloids whereby clusters of…

This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…

Austroads has produced a series of test methods developed from various technical projects, principally in the bituminous materials area (asphalt, binders, slurry and sprayed seals). The Austroads system of managing the test methods has enabled…

This Specification Framework for Polymer Modified Binders (PMBs) and Multigrade Bitumens has been produced by an Austroads Project Group. The specification is based on a set of test procedures that have been in use throughout Australia for several…