Publications

Filter
Topic
Publication State
Showing 1 - 10 of 173 Publications
Webinar: Validation of Superpave™ Method of Asphalt Compaction for Australasia
Austroads has completed a project to replace the obsolete gyratory compactors used in design and quality control testing of asphalt mixes and update its Guide to Pavement Technology Part 4B: Asphalt. Austroads asphalt mix design procedure currently…
Webinar: Update to the Guide to Bridge Technology Part 7
This webinar focuses on the recent update of Section 3 of the Austroads Guide to Bridge Technology Part 7.
Guide to Bridge Technology Part 7: Maintenance and Management of Existing Bridges
Guide to Bridge Technology Part 7 discusses the structural management of existing bridges in practical technical terms. It documents practices relevant to forward works programming, inspection, recording, reporting, evaluation of bridge condition…
Supply of Recycled Crushed Glass Sand
Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…
Austroads Test Methods and Specifications
This document provides a hyperlinked list of the Austroads Test Methods and Specifications.
Fillers for Asphalt
Austroads Technical Specification ATS 3125 sets out the requirements for added fillers for use in asphalt. The technical specification can also be downloaded as a 
Supply of Reclaimed Asphalt Pavement Material
Austroads Technical Specification ATS 3135 sets out the requirements for the supply of reclaimed asphalt pavement (RAP) material used in the manufacture of asphalt. The technical specification can also be downloaded as a 
Modified Surface Texture Depth (Pestle Method)
This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…
Supply of Aggregate for Asphalt
Austroads Technical Specification ATS 3130 sets out the requirements for the supply of coarse aggregate and fine aggregate for use in the production of asphalt. The technical specification can also be downloaded as a 
High Friction Surface Treatment
Austroads Technical Specification ATS 3466 sets out the requirements for the supply and application of High Friction Surface Treatment, which is used to provide very high skid resistance on the road pavement surface. The technical specification can…