Publications

This report describes the perceived impact of heavy freight vehicles using major freight routes on people living or working close to such routes. The literature obtained, and the experience of relevant stakeholders, suggested that noise and…

It is predicted that the Australian road freight task will more than double between 2000 and 2020. The Australian heavy vehicle industry estimates that the increased road freight task will result in the addition of approximately 50,000 trucks to the…

This test method sets out the procedure for determining the amount of binder drain-off likely to occur in an asphalt mix during storage and transport. The method may be used to determine the amount of binder drain-off at the maximum mixing…

This method describes the procedure for the recovery of sprayed seal samples from the pavement without disturbing the sealing aggregate orientation. The method stipulates how the void content of the sample is determined.

This test method sets out the procedure for assessing the degree of absorption of a primer or primerbinder by a given road gravel in bituminous surfacing work.

Selection of maintenance techniques is always a balance between the administering authority costs and social and environmental costs and outcomes. This project provides practical information and a methodology (including a worked example) for…

This test method details the requirements for determining the flexural stiffness, phase angle, dissipated energy per cycle, cycles to failure and cumulative dissipated energy at failure of asphalt subjected to repeated flexure by cyclical four-point…

This Report examines the role of noise impact assessment in the management of road traffic noise. Part 1 provides an overview of noise impact assessment including issues such as the existing noise environment, route selection and route changes,…