Publications

Structural analysis has progressed a long way from hand calculations and the use of distribution factors. From the first computer methods, grid and grillage analysis techniques evolved, leading through progressive enhancements to the advanced 3D…

Some old bridges in Australia were constructed with a deck system consisting of non-composite concrete slab over steel girders. The paper herein presents the methodology for structural retrofitting/ strengthening of these existing bridges based on…

The economic vitality of Auckland depends upon the movement of people and freight around the city’s motorways and the Auckland Harbour Bridge (AHB) is a crucial component of the network. Traffic loads derived from weigh-in-motion (WIM) data measured…

There are 5094 bridges and bridge size culverts under the jurisdiction of the Roads and Traffic Authority (RTA) NSW. More than 50% of these bridges were built before 1976 and design load was significantly lower than the T44 design load in accordance…

More sustainable bridge infrastructure can be achieved by eliminating costly and unnecessary replacement or overly zealous upgrading of ageing bridges. Estimates of current safety of bridges or their remaining service life are critically dependent…

The purpose of this report is to identify, review and compile existing literature on small travel time savings, and the current practice of considering the notion of small travel time savings in project evaluation. The review discusses both work and…

The purpose of this document is to develop and present a catalogue/checklist of items, which can be employed by transport agencies and their practitioners and consultants to properly document the methodology, data, analysis and results of project…

The project includes a literature review of speed-flow curves, review of practices across jurisdictions, implications of speed-flow curves for project appraisal, harmonisation of speed-flow curves. A range of speed-flow curve relationships is…

This report introduces key methodologies and the associated challenges with regards to defining and measuring travel time reliability, in particular, for improving the valuation of travel time in project appraisal by Australian jurisdictions.

This document is provided for the benefit of transport planners and managers. It reviews and summarises the Best Practice Cost Estimation Standard (BPCES) developed by Evans and Peck and is applicable to any transport project for which Australian…