Publications

Bonded Anchors are a type of connection which comprises a metal component, either a length of reinforcing bar, a threaded bar or a purpose-made anchor in combination with an adhesive. This type of anchor is increasingly being used to connect road-…

Collecting, processing, and administering data from bridge inspections underpins bridge lifecycle management. Although, the inspection process and identification of material defects is well defined and documented, little guidance is given on systems…

On the night of 5th September 2014 a road-train transporting 52 tonnes of ammonium nitrate crashed next to the Angellala Creek Bridge. The bridge is approximately 30km south of Charleville, on the Mitchell Highway in outback Queensland. The incident…

Captain Cook Bridge is an iconic bridge crossing the Brisbane River, and is the most trafficked bridge in Queensland, connecting the City’s south with the Brisbane Central Business District (CBD).

The revision of AS(AS/NZS) 5100 series has resulted in key changes to the provisions for train braking loads, dynamic load allowance, train collision loads, bridge bearings and design for light rail bridges. Longitudinal rail force provisions have…

Rapidly improving design technology and the desire to optimise structural designs, present challenges, and also opportunities, for bridge designers. One of the most important components of a modern bridge is the bearings.

Rapidly improving design technology and the desire to optimise structural designs, present challenges, and also opportunities, for bridge designers. One of the most important components of a modern bridge is the bearings.

The aftermath of the Christchurch earthquake highlighted difficulties in the assessment and repair of damaged plastic hinge zones in conventional reinforced concrete structures. Particular issues are uncertainty in strain history, low-cycle fatigue,…

Integral and semi-integral bridges are a common form of construction, providing some marked advantages over other construction forms. Integral and semi-integral bridges minimise the use of bearings and expansion joints by providing a direct…

Since the early 1920’s steel-concrete composite bridges have been widely used on New Zealand’s State Highway Network. Unfortunately, many shear connector types that have been used are not supported by current design rules within the standards…