Publications

Filter
Publication State
Showing 1 - 10 of 11 Publications
Guidelines for Design, Construction, Monitoring and Rehabilitation of Buried Corrugated Metal Structures

These guidelines provide essential information regarding Buried corrugated metal structures (BCMS) from the design process, installation, in-service monitoring, through to maintenance and repair procedures. BCMS have been used in Australia as an…

Strengthening of the West Gate Bridge Concrete Viaducts
The 2.5km long West Gate Bridge comprises an eastern and western concrete approach viaduct, 871m and 670m respectively in length either side of the 850 m long cable stayed steel box girder main span section. The key objective with the West Gate…
Fatigue and Maintenance Aspects of a Welded Steel Truss Railway Bridge
The main structural components of the railway bridge at Bankstown, installed in January 2011, are two 18m steel welded arch trusses with an overall height of 3.5m. Each truss comprises fabricated box sections for the chords and I sections for the…
Durability Assessment and Design for 100 Years Life in Aggressive Environments
The Banora Point Upgrade Alliance (BPA) project involves an upgrade of the 2.5 kilometer length of Pacific Highway through Banora Point, in northern NSW. The proposed upgrade will provide a link between the existing Chinderah bypass and Tweed…
Auckland Harbour Bridge Box Girder Strengthening Design and Construction
The economic vitality of Auckland depends upon the movement of people and freight around the city’s motorways and the Auckland Harbour Bridge (AHB) is a crucial component of the network. Traffic loads derived from weigh-in-motion (WIM) data measured…
Ballina Bypass Alliance -Tackling Quality
In 2008, the Roads and Traffic Authority (RTA) of New South Wales(NSW) advised all contractors to improve workmanship quality across all RTA construction projects. This followed the discovery that many structures, including bridges, were not being…
Degradation of Pile Exposed to Acid Sulphate Soil
Durability design of piles is usually carried out based on AS 2159 and AS 3600. It is widely known that the durability of concrete in acid sulphate environments is significantly influenced by the type of binder
Network Assessment for High Risk Mobile Crane Under IAP
There are 5094 bridges and bridge size culverts under the jurisdiction of the Roads and Traffic Authority (RTA) NSW. More than 50% of these bridges were built before 1976 and design load was significantly lower than the T44 design load in accordance…
Fatigue Life Estimation for Existing Reinforced Concrete Slab Bridges
Bridges with reinforced concrete slabs built in Western Australia between the mid 1970s and the late 1980s are likely to have cold-worked steel reinforcement. These slabs were designed to the NAASRA Bridge Standard, the national standard current…
Towards Transportation Networks Resilient to Natural Hazards, and Lessons from Recent Events
Transportation infrastructure provide an essential service to society and are vital for the efficient functioning of modern economies, and are thus considered key lifelines. Recent severe natural hazard events in Australasia – the earthquakes in…