Publications

Flexible granular pavements protected by sprayed seal surfacings are the backbone of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have therefore been focused on producing quality, long-lasting sprayed seal…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This method sets out the procedure for determining the degree of stripping of a single coat sprayed seal with a nominal aggregate size of 10 mm or larger.

This document is the combined output of two projects commissioned by Austroads to support improved consistency in Australia and New Zealand in inventory and condition data for road bridges, by developing a minimum set of inventory items, condition…

Concrete durability is of great interest to State Road Authorities (SRA's), who are responsible for over 8,000 concrete bridges and in excess of 16,000 major culverts, with a replacement value exceeding $8.5 billion. Many of these concrete…

This Pavement Work Tip provides a guide to calculate the volume of liquid bituminous binders relative to a standard temperature of 15°C.

The report summarises the activity in the Austroads sprayed seal design project for 2003/2004. Austroads member authorities were surveyed to determine if there were further issues with sprayed seal design that needed resolution. Recommendations for…