Publications

This webinar, presented on 9 November 2018, provides an overview of an Austroads study to develop suggested good practice for a consistent, efficient and safe approach to emergency egress signage within Australasian road tunnels.

This report provides guidance on consistent, efficient and safe design of emergency egress signage and operations in road tunnels. While there are Australian Standards relating to emergency egress signage, these were not originally intended for use…

Guide to Road Tunnels Part 1 outlines the structure of the Guide to Road Tunnels, while also introducing road tunnel planning. Part 1 describes key issues and considerations related to the implementation process, road tunnels in the context of a…

Guide to Bridge Technology Part 1 provides general information about bridge design and construction. Topics covered in this Part include factors affecting bridge performance, their relationship to bridge design standards, and the evolution of…

This report identifies factors that contribute to the occurrence and severity of crashes adjacent to and within tunnels and suggests remedial treatments that will reduce the incidence and severity of these crashes.

This report provides the results of testing of three potentially reactive aggregates by the accelerated mortar bar test (AMBT) and the concrete prism test (CPT).

The tests were conducted using reference mixes, which contained plain Portland cement as…

The seismic design provisions in AS 5100 have recently been revised to accord with AS 1170.4:2007. The revised provisions were mainly based on Austroads technical report AP-T200-12, titled Bridge Design Guidelines for Earthquakes .

This paper studies the mechanical and Data Acquisition performance of a Robotic Transverse Profiler (RTP), designed and built in the partnership between with ARRB and Laboratory of Motion Generation and Analysis for pavement technology study. A…

As part of the National Asset Centre of Excellence (NACoE), the Queensland Department of Transport and Main Roads (TMR) with ARRB Group has embarked on a program of research investigating the dynamic interactions between bridges and vehicles. The…

The aftermath of the Christchurch earthquake highlighted difficulties in the assessment and repair of damaged plastic hinge zones in conventional reinforced concrete structures. Particular issues are uncertainty in strain history, low-cycle fatigue,…