Publications

Filter
Topic
Publication State
Showing 1 - 10 of 51 Publications
Assessing Fitness to Drive: Implementation Strategy 2022
This report describes the proposed Strategy for implementation of Assessing Fitness to Drive for consideration by the Austroads Board. It has been developed based on the Implementation Framework endorsed by the Austroads Board in 2021, together with…
Assessing fitness to drive for commercial and private vehicle drivers
Driving a motor vehicle is a complex task involving perception, appropriate judgement, adequate response time and appropriate physical capability. A range of medical conditions, disabilities and treatments may influence these driving prerequisites.…
Webinar: Technical Basis of Changes to Guide to Pavement Technology
Austroads has published two technical reports drawing together the research underpinning changes made to key components of the Guide to Pavement Technology. The reports detail the technical basis for changes made to 
Technical Basis of Austroads Guide to Pavement Technology Part 2: Pavement Structural Design
This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo
Webinar: Engineering Guideline to Bridge Asset Management
The Engineering Guideline to Bridge Asset Management was developed to provide specific asset management guidance for road bridges. The guideline promotes an engineering approach (engineering principles, knowledge, experience and modelling tools) as…
Engineering Guideline to Bridge Asset Management
Asset management is defined by ISO 55000 (2014) as &lsquo
Webinar: Development of Design Procedures for Lightly Bound Cemented Materials in Flexible Pavements
The addition of a small amount of cementitious binder to non-standard granular materials may result in a fit for purpose base or subbase at a significantly lower cost than crushed rock complying with standard specifications. Such lightly bound…
Webinar: Improved Guidance on Interrupted Traffic Flow Theory
Austroads has recently completed a project to review and propose improvements to the guidance on interrupted traffic flow theory contained within the Austroads Guide to Traffic Management (AGTM), Part 2 and Part 3. The updates will broaden…
Development of Design Procedures for Lightly Bound Cemented Materials in Flexible Pavements
There is a need to improve Austroads procedures for the structural design of pavements containing lightly bound cemented (LBC) materials. This report describes the findings of an investigation of the performance of Queensland pavements with LBC…
Alkali-Silica Reactivity of Aggregate - Concrete Prism Test
This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…