Publications

Part 4J of the Guide to Pavement Technology provides information and guidance on: the classification and description of source rocks

The study involved a laboratory assessment of two cemented materials to assess their strength, modulus and fatigue properties. The cemented materials consisted of a hornfels crushed rock and a quartzite siltstone bound with general purpose cement at…

This report presents the results of testing conducted on an unbound granular pavement with a thin bituminous surfacing using a variety of tyre types and half-axle loads applied using the Accelerated Loading Facility. It was found that the reference…

This research involved a performance assessment of two cemented pavement materials using the Accelerated Loading Facility (ALF) to simulate heavy axle loading. The assessment involved a number of axle loads from a standard half axle load of 40 kN to…

Improved RD models for sealed granular and asphalt pavements are needed. Pavement performance history data from state road authorities and New Zealand (SRAs) were used for calibrating RD models. The calibration and refinement of RD models is…

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…