Publications

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

This report examines the viability of using recycled plastics in asphalt and sprayed seals by Australian and New Zealand road authorities. The report presents the findings of a literature review, including case studies of local and overseas road…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

This report details the experimental phase of an Austroads project to review the specifications and use of geopolymer concrete. The findings indicate that acceptable grades of structural geopolymer concrete can be made for field applications.

This…

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…