Publications

The purpose of this report is to provide clarity around the design and operation of raised safety platforms and deepen understanding of leading international practice across a range of applications and performance dimensions. A review of literature…

This report explores and draws together the ways in which place is classified, measured and valued from a transport perspective. Through a literature review, the study captured the way place was being measured and valued by a range of different…

Austroads Technical Specification ATS 5310 sets out the requirements for the supply, fabrication, handling and placement of steel used for the reinforcement of concrete (&lsquo

Austroads Technical Specification ATS 5350 sets out the requirements for the supply of materials and application of waterproofing membrane systems on new or existing concrete bridge decks. It does not cover waterproofing membrane systems for use on…

Austroads Technical Specification ATS 5390 sets out the requirements for the cathodic protection (CP) of steel in atmospherically exposed, buried and submerged concrete. It covers both new and existing structures and includes: assessment of existing…

This Austroads Technical Specification ATS 2230 sets out the requirements for the supply of small precast reinforced concrete rectangular box culverts, up to 1200 mm wide and 1200 mm high, and associated link slabs. It excludes box culverts: which…

Guide to Traffic Management Part 13: Safe System Approach to Transport Management is concerned with traffic management practice under the Safe System philosophy. The Guide emphasises the need for the road system to provide an environment which…

Austroads Technical Specification ATS 5343 sets out the requirements for the application of decorative and protective surface coatings to concrete, including supply and quality of materials, surface preparation, application, relevant testing and…

Austroads Technical Specification 5330 covers the requirements for the supply and delivery of Geopolymer Concrete in strength grades up to 50 MPa for use in the following applications: gutters, kerbing, drainage channels, footpaths, driveways,…

Austroads Technical Specification 5340 sets out the requirements for the patch repair of defective concrete using cementitious materials. The process of restoring existing concrete typically includes: breaking back to sound and dense concrete to…