Publications

This report considers the issues and possibilities of a data framework, incorporating road use data and network performance data, that could apply for all road authorities and provides guidance on a way forward, taking into account the current…

The report considers the issues of pricing, partnerships and accessibility in relation to road use data, traffic and network performance data. The aim of this report is to provide information on industry practices and inform the discussion on…

This report presents the final outcome of an investigation to review, analysis and identify suitable sealed granular pavement sections for inclusion in the LTPP study. The investigation identified 69 sealed granular pavement test sections across…

This report addresses the issue of calculating ESA-km in the road maintenance funding formula of AusLink This study recommends the use of an average ESA per heavy vehicle class in the funding formula This requires each jurisdiction to prepare from…

This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…

The suitability of the CoreLok device was assessed for estimating the bulk density of compacted asphalt specimens. The device encloses a sample in a plastic bag which is subjected to vacuum and sealed. Results were compared to saturated surface dry…

Australia s specification for paving grade bitumen AS 2008 evolved in the early 1970s from a penetration grading system to one with viscosity control at 60 Degrees Celsius. In support of this primary performance control property, penetration at 25…

This report describes an investigation into the temperature sensitivity and repeatability of test results obtained using a Cooper wheel tracking device. One set of specimens was tested at the standard temperature (60 Degrees Celsius) and two other…

The report presents data on the asphaltene content of samples manufactured between 1956 and 1991. Asphaltene content is one of the main chemical properties used to characterise bitumen. Bitumens are generally regarded as colloids whereby clusters of…

An inter-laboratory proficiency study was conducted based on the resilient modulus test. Participants from Australia and New Zealand were required to test nine asphalt cylinders prepared by a single laboratory. All participants used a MATTA to…