Publications

Filter
Topic
Publication State
Showing 1 - 10 of 194 Publications
Taking Representative Samples of Bituminous Binders From Road Tankers from Sampling Points Only
This work tip provides guidance on binder sampling to ensure that consistent and reliably representative samples are obtained so that any test results: represent, as near as practicable, an average of a consignment or batch
Webinar: Austroads National Harmonisation of Temporary Traffic Management Practice – Update
In this webinar, Chris Koniditsiotis, Lead Implementation Consultant and Patsy Thomas, National Temporary Traffic Management (TTM) Operations Manager provide an update on the implementation and operational commencement of the Austroads National…
Standardised Signage and Pavement Symbols for Low and Zero Emission Vehicles
This report, published in January 2022, provides a basis for future testing and standardisation of the symbols and road signage for low and zero emission vehicles in Australia and New Zealand, paving the way to adopt consistent symbols in the road…
Network Signage for Over Height Vehicles Approaching Road Tunnels
This report, originally published in November 2021, outlines the findings of a project to develop clearer and more consistent tunnel signage to reduce the impact of over-dimensioned and dangerous goods vehicles on both infrastructure and Workplace…
Assessing Fitness to Drive: Implementation Strategy 2022
This report describes the proposed Strategy for implementation of Assessing Fitness to Drive for consideration by the Austroads Board. It has been developed based on the Implementation Framework endorsed by the Austroads Board in 2021, together with…
Assessing fitness to drive for commercial and private vehicle drivers
Driving a motor vehicle is a complex task involving perception, appropriate judgement, adequate response time and appropriate physical capability. A range of medical conditions, disabilities and treatments may influence these driving prerequisites.…
Webinar: Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements Part 3: Performance Outcomes
Austroads Project APT6305 Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements is investigating the use of recycled plastics in asphalt. The project is almost completed with results to date provided in three published reports. The…
Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements: Final Performance and Environmental Assessment Part A
This report is the third of a series of reports for project APT6305. The first report examined the use of road-grade recycled plastics in asphalt pavements and investigated the most suitable types of recycled plastics for incorporation into asphalt.…
Technical Basis of Austroads Guide to Pavement Technology Part 4E: Recycled Materials
The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…
Webinar: Proposed Signage for Low and Zero Emission Vehicles and Associated Infrastructure
Austroads has published a report proposing a set of symbols for low and zero emission vehicles (LZEVs) and associated charging or refuelling infrastructure to be used on road signs and for road marking in Australia and New Zealand. The proposal…