Publications

For decades, Austroads Guide to Road Design (AGRD) has served as a critical resource for practitioners involved in road planning, design and engineering. Austroads recently completed a strategic review of road design guidance, identifying strategies…

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…

Supplements have provided important additional guidance to the Austroads Guide to Road Design (Guide). But there are questions about their use. Are these supplements needed? What should they contain? Should the information in the agency supplements…

This report is one of the two reports that document the findings of a research project undertaken to update the Austroads Guide to Road Design (AGRD). The project reviewed the jurisdictional practices of developing supplements to the AGRD to…

This report is one of the two reports that document the findings of a research project undertaken to update the Austroads Guide to Road Design (AGRD). The project reviewed the jurisdictional practices of developing supplements to the AGRD to…

This document describes the procedures to be followed to test an asphalt specimen using a wheel tracking test device. The procedures can be carried out on prismatic specimens that have been manufactured in the laboratory, cut from an existing…

This document describes the procedures to verify that a wheel tracking test device complies with the requirements of those devices permitted for use in Austroads test method ATM 231. The procedures are advisory rather than mandatory and reference…

The test method specifies procedures for the characterisation of the stiffness and fatigue behaviour of bituminous mixtures using a four point bending test configuration. The test procedure to characterise the complex modulus is contained in Section…

A recent Austroads project has updated the Guide to Road Design Part 4 series. This webinar is the third in a four-part series to provide an overview of the project, including the aim, research background, methodology and outcomes.