Publications

Austroads Project AT1064 Long Term Performance Monitoring and Model Development was initiated in 1994/95. The project was reviewed in 2003 and later in 2007 by GP Youdale Consulting Engineers to assess the project’s program and progress and, if…

This Pavement Work Tips provides guidance on estimating the amount of time available to achieve effective compaction under various conditions.

A major study was undertaken to determine relationships between binder rheological properties and the rut resistance of asphalt mixes, as indicated by the laboratory wheel tracking test. Twelve binders, including three bitumens, a Multigrade binder…

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…

The use of warm mix asphalt (WMA) appears to be increasing throughout the developed world in place of conventional hot mix asphalt (HMA). Acceptance depends upon confirmation of the environmental benefits and that on-road performance is at least…

The temperature sensitivity (K factor) of the ball penetration test is an important parameter in estimating the embedment allowance of the overlaying seal design. A series of ball penetration tests were performed in the laboratory to investigate the…

This report reviewed various approaches to produce warm mix asphalt (WMA) and their laboratory and field assessments. Reviewed technologies are the foamed mix based products (Aspha-Min, WAM-Foam and LEA), organic additive products (Sasobit,…

A road trial consisting of five different asphalt sections was placed in Brisbane to examine the relationship between rutting in-service and the laboratory wheel tracking test. The trial was placed at the Brisbane City Council quarry at Mount Coot-…

This report provides a general overview of polyphosphoric acid modified binder. A modification mechanism between the acid and binder was proposed. The addition of acid was found to change the chemical compositions of the binder noticeably. The…

This report presents a laboratory assessment of a warm mix produced using an organic additive (Sasobit wax). Three different types of mixes (control, Sasobit dry and Sasobit pre-blend) were produced at various mixing and compaction temperatures…