Publications

Filter
Publication State
Showing 1 - 10 of 20 Publications
Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Accelerated Long-term Ageing Methods for Sprayed Sealing Binders: A Field Validation Study
This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…
Webinar: Development of a Sprayed Seal Binder Cracking Test
This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).
Webinar: Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.
Performance of Asphalt and Spray Grade PMBs in Sprayed Seals
The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…
Austroads LTPP and LTPPM Study: Summary Report for 2006/07
This report presents the summary of project activities conducted in 2006/07. A number of suitable sealed granular pavement sites were identified across Australia for inclusion in the LTPP study. An improved revised method was used to calibrate HDM-4…
Review of Innovative Binder Delivery Systems (Pilot Study)
This report presented a summary of three pilot studies completed on bitumen emulsions, foam bitumen sprayed sealing and warm mix asphalt.Increasing awareness of environmental issues and energy conservation have led to identifying alternative binder…
Australian and International Bituminous Binder Specifications
This literature review covers the development of bitumen specifications and test procedures from Australia, USA, Europe and South Africa. In order to have a better understanding of the imported bitumens into Australia, this report discusses the…
Management of an Asphalt Road Trial
The establishment of an asphalt field trial requires considerable planning and usually involves significant resources. The selection of a trial site can significantly affect the likelihood of a clear outcome. The information provided will assist in…