Publications

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…

This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).

This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

This report presents an analytical and parametric study to assess the relevance of rutting performance models for unbound granular pavements.

The rutting performance relationship used in the Austroads Guide to Pavement Technology Part 2 – Pavement…

This report details of the performance of polymer modified binder (PMB) trial sites in South Australia and New South Wales after 12 months service life. It includes related information such as the seal designs, binder testing in the laboratory, site…

This study investigated whether the segregation propensity of a polymer modified binder (PMB) during hot storage affects its performance on the road.

The Australian PMB specification currently includes a segregation test which determines whether the…

This report examines the selection of an appropriate laboratory compaction device for stone mastic asphalt (SMA). The laboratory compaction of the SMA mix is crucial as the volumetric properties are selected based on the results from laboratory…