Publications

This report describes the proposed Strategy for implementation of Assessing Fitness to Drive for consideration by the Austroads Board. It has been developed based on the Implementation Framework endorsed by the Austroads Board in 2021, together with…

Driving a motor vehicle is a complex task involving perception, appropriate judgement, adequate response time and appropriate physical capability. A range of medical conditions, disabilities and treatments may influence these driving prerequisites.…

Austroads has published two technical reports drawing together the research underpinning changes made to key components of the Guide to Pavement Technology. The reports detail the technical basis for changes made to 

This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo

The addition of a small amount of cementitious binder to non-standard granular materials may result in a fit for purpose base or subbase at a significantly lower cost than crushed rock complying with standard specifications. Such lightly bound…

There is a need to improve Austroads procedures for the structural design of pavements containing lightly bound cemented (LBC) materials. This report describes the findings of an investigation of the performance of Queensland pavements with LBC…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…

Austroads Technical Specification 5340 sets out the requirements for the patch repair of defective concrete using cementitious materials. The process of restoring existing concrete typically includes: breaking back to sound and dense concrete to…

This Austroads Technical Specification ATS 2210 sets out the requirements for the supply and delivery of steel reinforced precast concrete pipes used for stormwater / drainage purposes. It excludes: concrete pipes subject to internal pressure…