Publications

This Pavement Work Tip details techniques to ensure that joints in asphalt do not create a point of weakness due to poor compaction and that correct shape and ride quality are maintained.

This Work Tip details work practices that help ensure uniformity of Binder Application Rates and neatness of joints in sprayed seals.

This Pavement Work Tip considers traffic distribution and its effect on the suitable location of joints and where the design Binder Application Rates should be varied to allow for the expected traffic volume.

This webinar provides an overview of Austroads&rsquo

This webinar presents a book &ldquo

Recent changes to the Australian and New Zealand Standards AS/NZS 1163:2009 Cold-formed structural steel hollow sections, AS/NZS 3678:2011 Structural steel Hot-rolled plates, floorplates and slabs, AS/NZS 3679.1:2010 Structural steel Hot-rolled bars…

A significant number of railway bridges within New South Wales are constructed from steel and have riveted connections which are forced to flex when transmitting loads through the structure. These connections are typically considered to have only a…

Mohaka Bridge is 216.4 meters long and was constructed in 1962. It is a steel truss bridge supporting a concrete deck. The trusses are supported on two abutments and two central piers. Two approach spans are supported on two secondary abutments. The…

The Auckland Harbour Bridge (AHB) is a steel truss bridge with welded orthotropic box girder extensions on both sides and provides a critical link over the Waitemata harbour. The logistical layout of the surrounding area does not provide any other…

Corrosion damage of steel elements is the main driver for development of corrosion management strategies by Asset Managers, the implementation of which draws significant amount from the government treasury. Since economic viability of any project is…