Publications

Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design provides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. It covers pavement investigation,…

Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…

New methods of using pavement deflection data were developed in the context of pavement structural rehabilitation treatment design. The project focused on two main components. The first was to assess the potential use of traffic speed deflectometer…

This webinar, presented on 22 August 2019, provides an overview of the key changes to the Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design and the significant advances in the thickness design of structural treatments for…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This report has been prepared by the Austroads Emulsion Project to provide general information on the use and application of bitumen emulsions in Australia and New Zealand. The information contained herein has been compiled from surveys and project…

The report describes the work undertaken in the first year of a two-year project to assist implementation of a new Australian asphalt mix design procedure. The main tasks undertaken were (i) preparation of an update for the Australian Provisional…

This framework for specifying asphalt has been prepared by Austroads and the Australian Asphalt Pavement Association, with input from the New Zealand Pavement and Bitumen Contractors Association (BCA) to promote national uniformity and good practice…

This report provides mix design flow charts for stabilised materials using lime, cementitious and bituminous binders. The mix design is based on laboratory characterisation using state-of-the-art approaches used by State Road Authorities, local…