Publications

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…

This test method defines the procedure for locating and identifying surface cracks in a road pavement using an automated crack detection system.

This test method defines the procedure for measuring the deflection velocity of road pavements using a traffic speed deflectometer (TSD) device.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level automatic crack detection.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a traffic speed deflectometer (TSD).

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement roughness measurement using an inertial profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement surface macro-texture determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.

This test method defines the procedure for performing validation checks of the measurements of pavement roughness determined using an inertial profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer.