Publications

This work tip provides guidance on binder sampling to ensure that consistent and reliably representative samples are obtained so that any test results: represent, as near as practicable, an average of a consignment or batch

Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…

Austroads has completed a project to replace the obsolete gyratory compactors used in design and quality control testing of asphalt mixes and update its Guide to Pavement Technology Part 4B: Asphalt. Austroads asphalt mix design procedure currently…

The Austroads asphalt pavement design process set out in Guide to Pavement Technology – Part 2: Pavement Structural Design (Austroads 2008) utilises a mechanistic procedure to predict the allowable traffic repetitions until asphalt fatigue occurs.…

Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…

A study of published information regarding the design and development of stone mastic asphalt (SMA) was undertaken. The main focus was upon obtaining information that had resulted in successful SMA mixes. In most instances the design of SMA had used…

This test was conducted to determine the relationship between wheel tracking characteristics found in a laboratory and rutting in real-world scenarios. A road trial was established in Brisbane at the Mount Coot-tha quarry. The site was chosen as it…

This document provides a guide to preparing samples for asphalt mix design to conform to Austroads design processes. It covers splitting of the raw components as well as compacting cylindrical and prismatic samples. The loose asphalt conditioning…

The Austroads Guide to the Structural Design of Road Pavements: Pavement Design (now the Guide to Pavement Technology: Part 2 – Pavement Structural Design) has been used throughout Australia for over 20 years. Progressive development of the Guide is…

A road trial was established at Gisborne on the Calder Highway. The aim of the trial was to review the performance of sprayed seals constructed from a number of binder types. Class 170 is typically used in Victoria for sprayed seals and a section…