Publications

Filter
Topic
Publication State
Showing 1 - 10 of 33 Publications
Supply of Recycled Crushed Glass Sand
Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…
Austroads Members Environment and Sustainability Initiatives Stocktake 2023
Austroads member agencies are actively addressing greenhouse gas emissions and other key environmental issues. This table summarises environmental and sustainability initiatives in place across Australia and New Zealand in 2023. Lighter shaded cells…
Supply of Polymer Modified Binders
Austroads Technical Specification ATS 3110 sets out the requirements for the supply of polymer modified binders (PMBs) and crumb rubber modified binders for use in both sprayed sealing and asphalt applications. The technical specification can also…
Webinar: Passenger Cars and other Non-Truck Tyres Crumb Rubber in Asphalt
This webinar focuses on the Austroads report Passenger Cars and other Non-truck Tyres Crumb Rubber in Asphalt: National Market Analysis, Review of Industry Practices and Technology Transfer. The report provides a comprehensive overview of the fate…
Webinar: Austroads Rejuvenator Evaluation Protocol for Increasing Asphalt Recycling
The use of reclaimed asphalt pavement (RAP) in new asphalt mixes is a common practice in Australia and New Zealand due to its many benefits. RAP contents are typically about 10&ndash
Passenger Cars and other Non-truck Tyres Crumb Rubber in Asphalt: National Market Analysis, Review of Industry Practices and Technology Transfer
This report provides a comprehensive overview of the fate of end-of-life tyres, the tyre recycling industry in Australia and New Zealand, the specifications for the use of crumb rubber in road applications and the potential benefits of other-than-…
Development of the Austroads Rejuvenator Evaluation Protocol
This report describes research into the development of a draft Austroads evaluation protocol for rejuvenators. Rejuvenators are typically used to produce asphalt mixes containing high levels of reclaimed asphalt pavement (RAP). The report includes a…
Webinar: Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements Part 3: Performance Outcomes Part B and Future Recyclability
Austroads has completed its project APT6305 Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements which was investigating road-grade recycled plastics that can be used to construct and maintain asphalt roads. The project results are…
Use of Road-grade Recycled Plastics for Sustainable Asphalt Pavements: Final Performance and Environmental Assessment Part B
This report is Part B of the third report for the APT6305 project. The first report examined road-grade recycled plastics in asphalt pavements and investigated the most suitable types of recycled plastics for incorporation into the asphalt. The…
Can plastic roads be part of a sustainable transport future?
This seminar was held on 2 September 2022 at RMIT University in Melbourne. It was sponsored by Austroads and attracted an audience of more than 400 people across the world. The 4-hour recording considers different perspectives of incorporating waste…