Publications

Filter
Topic
Publication State
Showing 1 - 10 of 126 Publications
Webinar: Methodology for Comparing Dangerous Goods Risk in Road Tunnels to Those on Alternative Routes
This webinar presents the work involved in developing a standardised comparative risk assessment method for assessing life safety risk of dangerous goods being routed through the tunnel or via an alternative surface route.
Methodology for Comparing Dangerous Goods Risks in Road Tunnels to Those on Alternative Routes: Best Practice Review
This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…
Methodology for Comparing Dangerous Goods Risks in Road Tunnels to Those on Alternative Routes: Case Study Using DG-QRAM in the Australasian Context
This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…
Methodology for Comparing Dangerous Goods Risks in Road Tunnels to Those on Alternative Routes: Manual for Using DG-QRAM in the Australasian Context
This report is the second of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…
Austroads Test Methods and Specifications
This document provides a hyperlinked list of the Austroads Test Methods and Specifications.
Extractions of Bituminous Binder from Asphalt
This method has been developed for extracting bituminous binders from bituminous mixtures i.e. asphalt field samples, loose plant mix or reclaimed asphalt pavement.
Characterisation of the Viscosity of Reclaimed Asphalt Pavement (RAP) Binder Using the Dynamic Shear Rheometer (DSR)
The test method sets out the procedure for the determination of viscosity of binders recovered from RAP source materials, as well as of virgin binders and rejuvenators.
Webinar: Best Practice for Road Tunnel Wall Panels and Finishes
Austroads has recently completed a project to identify best practice for road tunnel wall panels and finishes to ensure the products achieve performance, access, maintenance, and durability requirements. The best practice research provided through…
Water Retention of Concrete – Filtration
This test method is used to measure the ability of a concrete with a maximum coarse aggregate size of 20 mm or less to retain its water under pressure. This test determines the amount of water de-filtered when concrete is subjected to a certain…
Supply of Special Class Concrete
Austroads Technical Specification ATS 5315 sets out the requirements for the supply of Special Class Concrete used in: bridges with a design life of 100 years