Publications

This webinar presents the work involved in developing a standardised comparative risk assessment method for assessing life safety risk of dangerous goods being routed through the tunnel or via an alternative surface route.

This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This report is the second of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…

This document describes the procedures to be followed to test an asphalt specimen using a wheel tracking test device. The procedures can be carried out on prismatic specimens that have been manufactured in the laboratory, cut from an existing…

This document describes the procedures to verify that a wheel tracking test device complies with the requirements of those devices permitted for use in Austroads test method ATM 231. The procedures are advisory rather than mandatory and reference…

The test method specifies procedures for the characterisation of the stiffness and fatigue behaviour of bituminous mixtures using a four point bending test configuration. The test procedure to characterise the complex modulus is contained in Section…

Austroads has recently completed a project to identify best practice for road tunnel wall panels and finishes to ensure the products achieve performance, access, maintenance, and durability requirements. The best practice research provided through…