Publications

The Data Standard for Road Management and Investment provides road agencies and their suppliers, in Australia and New Zealand, with a specification for the data that supports common operational activities. The Priority Datasets (PDS) of the Data…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This guidance document aims to encourage fit‑for‑purpose use of available materials for sealed and unsealed road construction and maintenance, including renewal of low to medium level traffic roads. A fit‑for‑purpose material has properties and…

This report documents the findings of an Austroads project which aims to encourage sustainable roads through fit-for-purpose use of available materials. The research addressed the use of marginal and non-standard materials in both sealed and…

This report provides a review on surface characteristics in relation to traffic noise and long-life surfacings. For the conventional asphalt surfacings in general road construction practice, the selection of mix type and size would define two most…

Austroads Project AT1064 Long Term Performance Monitoring and Model Development was initiated in 1994/95. The project was reviewed in 2003 and later in 2007 by GP Youdale Consulting Engineers to assess the project’s program and progress and, if…

The Elastometer is the key testing instrument for PMB specifications in Australia. The Elastometer operating software and data acquisition system were developed in the 1980s, originally to run under DOS and later upgraded to Windows 3.1. This…

A weigh-in-motion (WIM) workshop held in Hobart in March 2008 identified a knowledge gap in regard to the management and operation of WIM equipment and associated data. Austroads Project AT1482 aims to fill this gap through establishing national…

Pavement performance data, in terms of Falling Weight Deflectometer (FWD) deflection, was collected from 71 test sections available from the LTPP/LTPPM sites and used to develop structural deterioration models for flexible asphalt and sealed unbound…

This report documents the development of interim network level road deterioration (RD) models for the roughness, rutting and cracking of sealed granular pavements.

These RD models can be used at the network level for the strategic analysis of the…