Publications

Showing 1 - 10 of 20 Publications
Truck Side / Longitudinal Friction Literature Review and Data Analysis
Practitioners have raised concerns when designing for heavy vehicles with respect to the combination of design values for side and longitudinal friction demand as well as design criteria for horizontal curves with adverse superelevation. This report…
National Specification for Crumb Rubber Binders in Asphalt and Seals
Crumb rubber binders have been used to construct sprayed seals in Australia for many decades but have not been utilised in asphalt in the past. Due to the lack of crumb rubber binder grades in the Australian national polymer modified binder (PMB)…
Development of the Dynamic Shear Rheometer Consistency 6% Test Method for Polymer Modified Binders
This report describes research work into the development of a new test method utilising the dynamic shear rheometer (DSR) to conduct consistency 6% at 60 
Technical Basis of Austroads Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design
This report documents the technical basis of the 2011 and 2019 editions of Austroads&rsquo
Technical Basis of Austroads Guide to Pavement Technology Part 2: Pavement Structural Design
This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo
Asphalt Fatigue Damage Healing and Endurance Limits: Guide Implementation Options

Overseas research has suggested that asphalt fatigue endurance limit may exist, where applied strain is sufficiently low no fatigue damage accumulates in the asphalt as the rate of asphalt healing exceeds the rate of damage accumulation. The…

Specification and Use of Geopolymer Concrete in the Manufacture of Structural and Non-structural Components: Review of Literature

This report reviews published information on the formulation, manufacture and properties of geopolymer binders and concretes, to inform the manufacture of geopolymer concrete components for structural and non-structural bridge components and other…

Realising 100-year Bridge Design Life in an Aggressive Environment: Review of the Literature

This report details a literature review on durability issues that affect the service life of reinforced concrete structures.

The review focused on information from sources within Australia and overseas, including published literature, standards,…

Realising 100-year Design Life of Bridge Structures in an Aggressive Environment: Experimental Work

This report summarises the results of experiments undertaken to understand the practices required to enable a 100-year design life of bridges in an aggressive environment.

The experimental work was informed by an extensive literature review and…

Levels of Service for Non-Freight Road Users

This report documents the results of an Austroads project to identify the asset management needs and level of service (LOS) requirements of future non-freight road users.

Preliminary work documented the relationship of this project to other Austroads…