Publications

This test method defines the procedure for performing field assessment of pavement marking retroreflectivity (night-time visibility) using a low angle retroreflectometer. It also defines a suitable minimum sampling requirement for all longitudinal…

Polymer modified binders (PMBs) are prepared from mixtures of polymers, additives and bitumen selected to achieve their required properties. Some of these binder systems can segregate leading to variations in measured properties and in some…

This document describes the procedures to be followed for compacting asphalt specimens using a gyratory compactor.

This test method defines the procedure for locating and identifying surface cracks in a road pavement using an automated crack detection system.

This test method defines the procedure for measuring the deflection velocity of road pavements using a traffic speed deflectometer (TSD) device.

This test method defines the procedure for performing validation checks of the measurements of pavement surface macro-texture determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.

This test method defines the procedure for performing validation checks of the measurements of pavement roughness determined using an inertial profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement surface texture determined using a laser profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer.

This test method defines the procedure for measuring the surface macro-texture of road pavements, determined by the direct measurement of the road surface profile using a laser profilometer.