Publications

This report provides descriptions of processes for setting maintenance intervention criteria and allocating budgets. Due to the multi-objective nature of road asset management activities, the decision process including setting maintenance…

This report addresses the issue of calculating ESA-km in the road maintenance funding formula of AusLink This study recommends the use of an average ESA per heavy vehicle class in the funding formula This requires each jurisdiction to prepare from…

This test method sets out the procedure for determining the amount of binder drain-off likely to occur in an asphalt mix during storage and transport. The method may be used to determine the amount of binder drain-off at the maximum mixing…

This method describes the procedure for the recovery of sprayed seal samples from the pavement without disturbing the sealing aggregate orientation. The method stipulates how the void content of the sample is determined.

This test method sets out the procedure for assessing the degree of absorption of a primer or primerbinder by a given road gravel in bituminous surfacing work.

This test method details the requirements for determining the flexural stiffness, phase angle, dissipated energy per cycle, cycles to failure and cumulative dissipated energy at failure of asphalt subjected to repeated flexure by cyclical four-point…

The state of the art in using GIS to integrate crash data with other information sources, and resources and capabilities available for this purpose in Australia and New Zealand, were established through a literature review and a series of…