Publications

The Westgate footbridge provides a new pedestrian and cyclist connection across four carriageways of State Highway 16 near the Westgate Shopping Centre in Auckland, NZ. The bridge is 3 m wide and consists of three separate structures

Detailed investigation and live-load evaluation was undertaken for several 1930s reinforced concrete bridges followed by strengthening where required.

The role of effective project/contract management in the successful delivery of Impressed Current Cathodic Protection (ICCP) systems has been recognised by RMS specification for ICCP, BS361, which has comprehensive provisions for the supervision of…

A major revision of AS 5100.4 Bearing and Deck Joints has been undertaken in preparation for the publication of a new edition of AS 5100. The major changes to Part 4 of the Standard include the introduction of provisions for modular deck joints and…

NSW Roads and Maritime Services manage 26 movable span bridges of which 11 are still operational. These bridges were the subject of a recently completed study undertaken jointly by RMS and GHD Newcastle which focused on the components of each bridge…

The M80 Ring Road Upgrade is a road project by VicRoads to improve the 38 km freeway extending from Laverton North to Greensborough. The contractor is Fulton Hogan and KBR is the lead designer for the detailed design of a section between Edgars Road…

The Gerringong upgrade is the first of the three sections of the Princes Highway upgrade between Gerringong and Bomaderry on the South Coast of New South Wales. Roads and Maritime Services contracted Fulton Hogan to design and construct the…

As part of the Footscray to Deer Park section of the Regional Rail Link project in Melbourne, major road bridge replacements were constructed at Nicholson Street and Albert Street. Both bridges span over the widened rail corridor.The available…

As part of the Peninsula Link Project, the project contract documents required that the designer take responsibility for the design and documentation of temporary propping supports for precast girders to discharge their safe design responsibilities.…

AS 5100, the Australian Bridge Design Code, is currently under review. AS 5100.2, Design Loads, sets out the minimum design loads, forces and load effect for road, railway, pedestrian and bicycle bridges and other associated structures.The review of…