Publications

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

The report provides a summary of works undertaken during the period 2016–17 for the Austroads project AT1064 – Long-term pavement performance (LTPP).

Austroads has funded the long-term pavement performance study since late 1994. The project monitors…

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

EME2 mixes are produced using a hard paving grade bitumen applied at a high binder content (approximately 6%). Compared to conventional asphalt bases with unmodified binders, EME2 asphalt is characterised by high stiffness, high durability, superior…