Publications

This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…

The characterisation of the flexural stiffness and fatigue behaviour of bituminous mixtures in Australia and New Zealand is undertaken using a four-point bending (4PB) configuration. This document describes the procedures to be followed to verify…

This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…

The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…

This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.