Publications

Filter
Topic
Publication State
Showing 11 - 20 of 32 Publications
Webinar: Emerging Vehicle Technology Trials Online Repository
This webinar presents an Austroads online repository of emerging vehicle technology trials conducted by Austroads&rsquo
Technical Basis of Austroads Guide to Pavement Technology Part 2: Pavement Structural Design
This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo
Webinar: Development of Design Procedures for Lightly Bound Cemented Materials in Flexible Pavements
The addition of a small amount of cementitious binder to non-standard granular materials may result in a fit for purpose base or subbase at a significantly lower cost than crushed rock complying with standard specifications. Such lightly bound…
Development of Design Procedures for Lightly Bound Cemented Materials in Flexible Pavements
There is a need to improve Austroads procedures for the structural design of pavements containing lightly bound cemented (LBC) materials. This report describes the findings of an investigation of the performance of Queensland pavements with LBC…
Alkali-Silica Reactivity of Aggregate - Concrete Prism Test
This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…
Alkali-Silica Reactivity of Aggregate – Accelerated Mortar Bar Test
This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…
Webinar: Vehicles and Technology – Future State 2030
This webinar, presented by Andrew Somers and John Wall on 6 August 2020, outlines the results of Austroads&rsquo
Webinar: Education and Training for Drivers of Assisted and Automated Vehicles
This webinar, presented on 13 May, identifies the skills, knowledge and behaviours drivers need, now and in the future, to safely operate cars and trucks equipped with higher levels of automation. Building on lessons learned from the aviation sector,…
Education and Training for Drivers of Assisted and Automated Vehicles
This report documents the outcomes of research designed to: examine what role, if any, registration and licensing authorities should undertake to ensure that licence applicants are competent in the use of advanced driver assistance systems (ADAS
Cementitious Patch Repair of Concrete
Austroads Technical Specification 5340 sets out the requirements for the patch repair of defective concrete using cementitious materials. The process of restoring existing concrete typically includes: breaking back to sound and dense concrete to…