Publications

Flexible granular pavements protected by sprayed seal surfacings are the backbone of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have therefore been focused on producing quality, long-lasting sprayed seal…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This webinar, presented by Andrew Somers and John Wall on 6 August 2020, outlines the results of Austroads&rsquo

This Austroads Technical Specification ATS 2230 sets out the requirements for the supply of small precast reinforced concrete rectangular box culverts, up to 1200 mm wide and 1200 mm high, and associated link slabs. It excludes box culverts: which…

This webinar, presented on 13 May, identifies the skills, knowledge and behaviours drivers need, now and in the future, to safely operate cars and trucks equipped with higher levels of automation. Building on lessons learned from the aviation sector,…

This method sets out the procedure for determining the degree of stripping of a single coat sprayed seal with a nominal aggregate size of 10 mm or larger.

This report documents the outcomes of research designed to: examine what role, if any, registration and licensing authorities should undertake to ensure that licence applicants are competent in the use of advanced driver assistance systems (ADAS

This Austroads Technical Specification ATS 2210 sets out the requirements for the supply and delivery of steel reinforced precast concrete pipes used for stormwater / drainage purposes. It excludes: concrete pipes subject to internal pressure…

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…