Publications

This webinar, presented on 17 February 2020, provides an overview of the life cycle management of local sealed and unsealed  roads. It highlights the Austroads Guides and the AUS-SPEC national local government specification system which assist local…

Guide to Pavement Technology Part 8: Pavement Construction provides advice on the general requirements for the management of quality assurance, construction planning, earthworks, subsurface drainage, unbound pavements, stabilised pavements, sprayed…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This webinar, presented on 13 November 2018, outlines the strategic context on the supply of road operator data for connected and automated vehicles use in Australia, and the recommended next steps to navigate through this developing field.

This webinar, presented on 25 September 2018, presents challenges around the introduction of automated heavy vehicles to remote and regional areas and the opportunities for future their use in Australia and New Zealand.

This report identifies opportunities for future use of automated heavy vehicles in regional and remote areas of Australia and New Zealand, as well as any boundaries to prevent such use. The report provides road managers and industry with direction…

This report sets out the strategic context for the supply of road operator data for use by Connected and Automated Vehicles (CAVs) in Australia and includes recommended next steps.CAVs are anticipated to rely heavily on data from their sensors for…

This webinar, presented on 17 July 2018, outlines ways to optimise the use of marginal and non-standard materials and gain best value from the successful performance of standard materials. It covers: applying a proposed assessment process to a wider…

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…